LED track spotlight installation method

LED track spotlight installation method:

1. Preparatory work: power off, check all parts and application-specific tools for track spotlight installation, track spotlight installation includes track, socket installed on the track, lamp socket fixed on the socket, installed in the lamp socket There are two conductive sheets installed on the top of the above-mentioned rail, and a long groove-shaped groove is arranged on the bottom edge of the rail. The special tools include a test pen, a measuring instrument and an adhesive tape.

2. Installation of electrical transformers: Track spotlights must be installed with power transformers, and electrical transformers can reasonably avoid the frequent application of track spotlights from explosions, and are convenient for daily use.

led track spotlight

3. Installation of lighting fixtures and light stands: According to the installation needs of the track spotlight design, the actual operation can not be exceeded. The aspect ratio of the logo cannot be exceeded. Fix the track stand, then install the track spotlight, thread it, and fix it. Do not move the anchor bolts to assemble the lamp socket on the socket and adjust the illumination angle and orientation of the track spotlights. The elevation angles of the track spotlights installed in parallel should be consistent and orderly, so that the track spotlights will illuminate the light. The actual effect is more beautiful.

4. Inspection and testing: After the installation of track spotlights is all over, power on the track spotlights, turn on the power switch, observe whether the track spotlights are working normally, and adjust the illumination angle of the track spotlights.